Item01
ServiceSupply & delivery
Beams and lintels
W-shapes and built-up lintels cut to length, with bearing plates and bolt holes where the drawing calls for them.
Kortex/Capability/Supply & delivery
Structural steel supply & delivery
Steel for your own crew to set: cut, drilled, coped and primed to your list, delivered to the site on the day you name.
ScopeCut · drill · prime · deliver
StockW-shapes · HSS · angle · plate
CoverageGTA + Golden Horseshoe
Typical lead timeSame week for stock
Order it like a parts list. Receive it ready to set.
Builders and framers often need the steel without the crew: a beam over a new opening, posts for a basement lowering, a lintel schedule for a block wall. Send the list or the drawing and we cut, drill, cope and prime each piece, mark it, and deliver it with the paperwork.
Delivery is by flatbed or boom truck, scheduled around your crane or your framers, anywhere in the GTA and the wider Golden Horseshoe.
Item02
ServiceSupply & delivery
Posts, columns and plates
HSS and pipe columns with cap and base plates welded on, adjustable posts, embed and bearing plates.
Item03
ServiceSupply & delivery
Shop preparation
Copes, holes, stiffeners and primer done in the shop so nothing has to be cut on your site.
What goes on the drawing.
| Element | How we detail it | Typical |
|---|---|---|
| Sections | Sourced from stock where possible, with mill certificates filed by heat number. | CSA G40.2150W, 44W |
| Preparation | Cut square or to angle, holes drilled or punched, copes and bevels as drawn. | To drawingmarked per piece |
| Finish | Shop primer standard, galvanizing available with a longer lead time. | Primedgalvanized on request |
| Delivery | Flatbed or boom truck, scheduled to the hour where the site needs it. | GTA-widesame week for stock |
Questions we get asked.
Answered here, so they stop arriving by email.
Is there a minimum order?
No. A single beam is a normal order for us.
Can you unload on site?
Yes. Boom truck delivery places the steel where you want it, within the truck's reach.
Do you supply the engineering?
We supply to your drawings. If you need the members sized, our design and detailing service can arrange that with an engineer.
From measure to handover.
Visit 1
Measure
Floor levels, opening, headroom and the structure around it. No charge inside the GTA.
Drawing
Approve
A shop drawing showing the work against your levels, sent for your and your engineer's sign-off.
Visit 2
Install
Sections delivered and field welded. One to three days for a typical residential job.
Visit 3
Finish
Welds ground, coating touched up, guard checked, and the site left clean.
Next step
Send a photo and we will send back a number.
Most supply & delivery enquiries are answered the same day. If it needs a site visit to be honest about, we will say so rather than guess.